3.8
Adjusting of the footrests
3.8.1 Length of the footrests
CAUTION:
Risk of damage – Avoid that the footrests make any contact with the
ground. Keep a minimum distance from 60 mm above the ground.
3.8.2 Adjusting leg support
The leg supports are available in different sizes. Small size for seat width 400 mm
wheelchair and medium size for wheelchair with seat widths 450 mm and 500 mm.
Adjusting the height:
Adjust the length of the footrests as follow:
1. Remove the screw
c
footrests).
2. Adjust the length of the footrest to a comfortable
length.
3. Tighten the screw
c
1. Fold away leg support (according paragraph
2.5).
2. Loosen bolt
on the side of the footrest.
c
3. Adjust the height of the leg support to a
comfortable position (step less).
4. Retighten the bolt
Inovys II
2011-11
(on the back of the
properly.
The max adjustable length
of the footrest shall be
marked with a triangle on
the tube.
Not possible when
footrest is in vertical
position.
.
c