Preparation
1
1
Place the main unit on a flat, level surface.
● Place the appliance on a flat, level and solid surface, such as a desk, etc.,
when using. Do not hold the appliance in your hands during use.
● If the appliance is not standing straight, the water supply tank cannot supply
water to the main unit, and the main unit will not be able to release steam.
2
2
Remove the water supply tank from the main unit.
● Pull up on the water supply tank.
3
3
Turn and open the water supply cap.
4
4
Fill the water supply tank with water and close the
water supply cap.
● The steam lasts for about 6 minutes when the water is filled
to "FULL" mark and for about 3 minutes when the water is
filled to "HALF" mark.
5
5
Wipe away any water on the surface of the water
supply tank.
6
6
Attach the water supply tank to the main unit.
● Push the water supply tank into the main unit until it clicks.
● Water is supplied to the main unit and the water in the tank
decreases when the water supply tank is attached the main unit.
● If the water supply tank is repeatedly attached and removed,
water may begin to leak from the water outlet. It is normal.
Use only distilled water or purified water.
Since the service life of the appliance may shorten depending on water quality,
the use of distilled water or purified water is recommended. Please purchase
them separately.
8