Remote Controller - Infiniton inAir-2200 Manual De Instrucciones

REMOTE CONTROLLER

OPERATION DISPLAY
It displays the current
settings.
TIMER SET button
Please see" timer operation"
TEMPERATURE
ADJUSTMENT buttons
Press once, the setting
temperature increases by
Press once, the setting
temperature decreases by
The range of setting
temperature is 16-31 .
DISPLAY button
Press it once to stop the indoor
unit displaying and press again
to make it display.
RUN/STOP button
Turns unit ON/OFF.
FAN SPEED button
Press it to change the fan speed
in the order of low-medium-high
-auto (
NOTICE:
Cool only type has no HEAT nor ELECTRIC-HEAT mode.
To operate, the distance should be within 6 meters from the indoor unit with a clear
line of sight.
Remove the batteries if the remote controller is not to be used for long periods of time.
In this illustration, all displays are ON for the purpose of explanation. Some models
may not show all these indications.
Don't tear the batteries apart or throw them into fire, which will lead to irreparable damage.
Signal ejecting window
It sends signals to the indoor unit.
.
1 .
1 .
I/O
).
AUTO
SWING
MANUAL
OPERATION
MODE
TIMER CANCEL
TURBO
DISPLAY
FAN SPEED
SLEEP
1 1 1 1
SWING button
Press it to change up/down air
flow direction and the deflector
automatically swings up and
down, press it again the deflector
stops swinging.
MANUAL
SWING button
When the deflectors move at the
certain angle you want, you can
press this button to fix this angle,
then the air will be blew through
this angle all along.
OPERATION
MODE button
Press it to select operation mode:
AUTO COOL
DRY
TIMER CANCEL button
Press it once to cancel timer function.
TURBO button
Press it to start turbo function
and press it again to stop it.
SLEEP button
Please see"sleep mode".
FAN HEAT