Infiniton inAir-2200 Manual De Instrucciones página 16

5.
HEAT mode(only applied to heat pump type)
Press MANUAL SWING button or SWING button to change the air flow
direction.
Press FAN SPEED button to change the fan speed of indoor unit.
Press TEMPERATURE ADJUSTMENT button to change the set temperature.
6.
TURBO function (only applied to turbo series)
This function will make the air conditioner heat or cool quickly and during
this period, the noise of the air conditioner will increase. Turbo function
can be only started up in heat or cool mode(turbo heating or turbo cooling)
otherwise, it can not be started up. When the air conditioner is in cool or
heat mode, press turbo button to initiate turbo function, the remote con-
-troller displays "
the air conditioner cannot be controlled by the remote controller. Press
turbo button again or start up sleep mode or transit modes to exit turbo
function. After exiting turbo function the fan runs at low speed.
7.
SLEEP mode
Normal sleep
When the air conditioner is in cooling and dry mode, the indoor fan runs at
low speed.After one hour of operation the set temperature will increase by
1 .One hour later, the set temperature will increase by 1
unit will then continue operating at 2
When the air conditioner is in heating mode , the indoor fan runs at low
speed. After one hour of operation the set temperature will decrease by 2 .
One hour later, the set temperature will decrease by 2
unit will then continue operating at 4
Sleep mode 1
When the air conditioner is in cooling and dry mode and 23
during the 3 hours after sleep mode 1 start up ,the set temperature will
increase by 1
the set temperature. 8 hours later, the set temperature will decrease 2 .
The unit will then continue operating at this temperature.
" and the icon of fan speed is "
every hour .The unit will continue operating at 3
above the set temperature.
below the set temperature.
1 1 4 4
",meanwhile
once more.The
once more. The
st 16 ,
above