Towing Or Winching; After Use Each Day; Hour Meter - Upright X26 Manual Del Usuario

Towing or Winching

T W
OWING OR
Perform the following only when the machine will not operate under its own power and it is necessary to
move the machine or when winching onto a transport vehicle (see "Transporting the Work Platform" on
page 11).
C A U T I O N
DO NOT tow or winch the machine faster than 0,3 m/s (1 ft./s). Faster speeds will damage drive
components and void the warranty.
W A R N I N G
!
Never tow faster than 0,3 m/sec. (1 ft./sec.).
Never operate the work platform with the parking brakes released. Serious injury or damage could
result.
A
F T E R
1. Ensure that the platform is fully lowered.
2. Park the machine on a firm level surface, preferably under cover, secure against vandals, children and
unauthorized operation.
3. Turn the Chassis Key Switch to OFF and remove the key to prevent unauthorized operation.
H M
O U R
To access the hour meter function perform the following steps.
1. Climb into the basket (with the machine powered up)
2. Push the platform emergency stop button.
3. Hold down the following buttons, Jib and Upper Boom Lift.
4. While holding the buttons twist the emergency stop button to return power to the machine.
5. "hr" will now be displayed on the read-out, Pressing the right turn button will scroll through the accumu-
lated hours two digits at a time. For example, if pressing the right turn button once displays "20", pressing it
a 2nd time displays "58", and pressing it a 3rd time displays "hr", the elapsed time of operation is 2058
hours.
T
RANSPORTING THE
P
R E P A R A T I O N F O R
1. Fully lower the platform.
2. Disconnect the battery negative (-) lead from the battery terminal.
3. Band the controller to the front guardrail.
4. Band the elevating linkage to the frame.
Operation Manual
INCHING
U E D
S E A C H A Y
E T E R
W
ORK
S
H I P M E N T
!
P
LATFORM
504165-002
Page 11