Tabla de contenido
Publicidad
Parts and their functions
LCD screen indicators
The screen shown below appears when the PIC.SIZE switch is set to AUTO.
The indicators are not displayed when the switch is set to FULL.
The error display 8 is displayed when an error occurs in the viewfinder, regardless of the PIC.SIZE switch setting.
Note
What is displayed by the indicators on the screen depends on the camera used in combination
with the viewfinder. For details, refer to the operating instructions of the camera.
When set to AUTO
TALLY/REC
0:12:23.01
60i
20%
1080-59.94i
AVC-I100
CH1
CH2
BATT
1 Green tally indicator
Lights up green when the green tally signal is received.
The conditions under which this indicator lights will differ depending on the camera settings.
2 ! indicator
The conditions under which the ! indicator lights can be set using the ! LED item of the menu of the camera unit.
Use this indicator to avoid making operating errors during various operations, for instance.
3 Amber tally indicator
Lights up amber when the amber tally signal is received.
4 Yellow tally indicator
Lights up yellow when the yellow tally signal is received.
5 TALLY/REC indicator
Lights up red while recording is underway or when the red tally signal is received.
It blinks red when trouble has occurred.
The conditions under which this indicator lights and blinks will differ depending on the camera settings.
6 BATT indicator
Indicates the status of the battery in the camera. The conditions under which this indicator lights and
blinks will differ depending on the camera settings.
7 SAVE indicator
Blinks or lights up depending on the settings of the camera. The conditions for blinking or lighting up
change according to the settings of the camera.
8 Error display
Displayed when an error occurs in the viewfinder. If the problem is not resolved by turning off power to
the camera, stop using the viewfinder and consult your dealer.
HEATER ERROR :
SENSOR ERROR :
(continued)
2 END
13.8V
SAVE
HEATER ERROR
D isplayed when an error occurs in the operation of the heater inside the viewfinder.
D isplayed when an error occurs in the operation of the temperature sensor in the
viewfinder.
When set to FULL
0:12:23.01
60i
20%
1080-59.94i
AVC-I100
CH1
CH2
2
END
13.8V
(19)
Publicidad
Tabla de contenido
