Sleep Mode; Failures And Blocks; Battery Status And Charging - Vermeiren SE04 Manual De Instrucciones

EN
NL

4.1.2 Sleep mode

The operating console will go into sleep mode after a period of inactivity (default 5 minutes). When
the system sleeps, it is partially turned off to reduce energy consumption.
To reactivate the operating console, press a button or move the joystick.
4.2

Failures and blocks

When the operating console is powered and a failure
appears, the indicator of the ON/OFF buttons starts
blinking in red, see picture. The number of blinks indicates
the fault code. For a few seconds, a triangle with fault code
(A) is displayed. The ON/OFF buttons will keep blinking.
In case of a failure, one or all functions of the operating
console are blocked. This is indicated by the "forbidden"-
symbol and the yellow warning bars (B).
The status is indicated by a small symbol (C) in the top corner of each screen.
For more information, see §5.
4.3

Battery status and charging

WARNING
• Follow the charging instructions in the wheelchair instruction manual and the supplier's manual
of the battery charger.
The battery charge indicator (located at the top of the touchscreen) provides
an estimation of the remaining battery capacity.
In the following table all battery indications and their meanings are collected.
Table 1: Battery status description
Display
Failure indication and drive inhibited
Risk of injuries and damage
Description
Most blocks are green
Blocks turn yellow
Blocks turn red
Yellow or green blocks
with charging symbol
A
Battery status indication
Meaning
Battery capacity: more
than 50% of full
capacity.
Battery capacity level
is decreasing: less
than 50% of full
capacity
Battery almost empty
Battery is charging.
Battery capacity level is
indicated by colour.
8
SE04
2019-11
Operating console functions
C
B
Remarks
Consider recharging
the battery soon.
Stop and recharge
now.
Wait until battery is
completely charged.