TaoTronics TT-BA08 Guía De Usuario página 7

Pair in RX mode:
1. Set the TT-BA08 to RX mode and connect it to your non-Blue-
tooth audio receiving device.
®
2. Turn on the TT-BA08 and tap the power button twice to enter
pairing mode.
3. Activate the Bluetooth function on your transmitting device –
®
phone / tablet, and search for the nearby Bluetooth
4. Find "TaoTronics TT-BA08" in the search results and tap on it to
connect. Once connected, the LED indicator will turn solid blue.
Note:
• The adapter will enter pairing mode automatically when powered
on for the first time.
• The original pairing memory will be cleared after a mode switch. It
will automatically start pairing each time it's powered on.
• The adapter can remember previously paired devices and will
attempt to pair with devices automatically, without going into pairing
mode.
® devices.
Pair with two devices at the same time
In TX mode:
In TX mode, the adapter is able to pair with two Bluetooth
earphones/speakers at the same time.
1. Follow the previous instructions in the "Pairing" section to pair
the TT-BA08 with your first device.
2. Turn off the Bluetooth
function on your first device, tap the Power
®
Button twice to pair and connect to your second device.
3. Turn on the Bluetooth function on your first device. In
®
approximately 10 seconds, the first device will automatically
connect in.
Note:
• When you pair with two devices, both can play music at the same
time.
• The adapter will automatically re-pair when powered on.
In RX mode:
In RX mode, the adapter is able to pair with two Bluetooth
at the same time.
1. Follow previous instructions in the "Pairing" section to pair the
stereo
®
® devices
05/06