Cleaning And Maintenance - Armor All AA12V1 Manual Del Usuario

IMPORTANT:
1. The appliance is designed for vacuuming only small amounts of liquid.
2. STOP vacuuming if the liquid in the container reach the "max" indicator lin on the container. (fig. 8)
3. Empty it immediately before next use or storage.

CLEANING AND MAINTENANCE

CLEANING AND MAINTENANCE
WARNING:
ALWAYS DISCONNECT THE PLUG FROM THE SOCKET BEFORE REMOVING THE
CONTAINER FROM THE APPLIANCE.
Regularly clean the filter. The filter is re-usable and should be cleaned regularly.
1. Verify that the plug is disconnected from the power outlet. (fig. 1)
2. Press the release button (C) and remove the container (G). (fig. 2)
3. Empty all debris and any dust from the container. (fig. 3)
4. Remove the filter (E) and clean any loose dust off the filter.
5. Wash the filter in warm, soapy water. (fig. 4)
6. Make sure the dust bowl and filter are clean and dry before using it again. DO NOT immerse the
appliance in water. (fig. 5)
7. Refit the filter (E) onto the appliance. (fig. 6)
8. Refit the container onto the appliance. Make sure the container clicks into place. (fig. 7)