Mounting The Kombitool; Starting / Stopping The Engine - Stihl FBD-KM Manual De Instrucciones

English
2
3
5
Line up the drive tube (3) in the
N
gearbox (2) so that the lug (arrow)
on the drive tube points vertically
upwards when the depth wheel (5)
is upright.
Tighten down the clamp screw
N
firmly.
12

Mounting the KombiTool

2
1
Push the lug (1) on the drive tube
N
into the slot (2) in the coupling
sleeve as far as stop.
3
4
When correctly installed, the red line (3)
(arrow point) must be flush with the end
of the coupling sleeve.
Tighten down the star knob (4)
N
firmly.
Removing the KombiTool
Reverse the above sequence to
N
remove the drive tube.
Starting / Stopping the
Engine
Starting the engine
To start the engine, basically follow the
instructions for use for the KombiEngine
or basic power tool!
Place the machine on the ground in
N
a secure position
The blade must not touch the ground or
any other objects – risk of accident!
Assume a firm stance – possibilities:
N
standing, bending or kneeling
Press the machine firmly against
N
the ground with the left hand – do
not touch the control elements on
the control handle while doing so –
see instruction manual for the
KombiEngine or basic power tool
FBD-KM