Connecting The Projector - Sony VPL-FH300L Manual De Referencia

Projecting

Connecting the Projector

When you connect the projector, make sure to:
• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Insert the cable plugs firmly. When pulling out a cable, be sure to pull it out from the
plug, not the cable itself.
• Refer also to the instruction manual of the equipment to be connected.
To remove the connector covers
Before connection, remove the connector covers on both sides of the lens.
First remove the two screws on the bottom of each connector cover, and then lift up the
bottom side of the cover as in the illustration.
The connector covers are connected with the main unit by the fall-prevention wires.
INPUT
SHIFT ZOOM FOCUS
MENU ENTER
INPUT A RGB
INPUT D HDMI
INPUT B RGB
OUTPUT MONITOR
R/R-Y/P R G/Y B/B-Y/P B SYNC/HD VD
INPUT C
INPUT E
Fall-prevention
wire
5
GB
Projecting