Disposal Of The Unit; Features - Sony LMD-152 Manual De Instrucciones

Side

Disposal of the unit

• Do not dispose of the unit with general waste. Do not
dispose of the monitor with household waste.
• The fluorescent tube contains mercury. Dispose of the
monitor in accordance with the regulations of on local
sanitation authority.
If you have any questions about this unit, contact an
authorized Sony dealer.
Notes
• The LCD Monitor has a built-in cooling fan. If "FAN
ERROR (MEU)" or "FAN ERROR (LMD)" is
displayed on the screen, turn the power off and consult
with qualified Sony personnel.
• If a snowy picture appears when a computer signal is
input, change a value of the vertical refresh rate.
• Changes in room temperature sometimes make the
cabinet expand or contract, causing a noise. This
does not indicate a malfunction.
• The LCD Monitor is designed for use with MEU-
WX2.
• Clean the rear cover area of the LCD Monitor
regularly.
Dust in the rear cover area may cause a problem
with the cooling system of the LCD Monitor set.
• When the monitor is turned on at a low temperature,
an approximately 1-hour warming-up period may
be required to obtain stable brightness of the whole
screen (for the LMD-212 only).
Warning on power connection
Use a proper power cord for your local power supply.
The United States, Canada Continental Europe
Plug type VM0233
Female end VM0089
Cord type SVT
Rated Voltage & Current 10A/125V
Safety approval UL/CSA
1)Use an appropriate rating plug which is applied to local regulations.
1
1.2 ( / )
16
Unit: cm (inches)
COX-07/636
COX-02/VM0310B
H05VV-F
10A/250V
VDE

Features

The LMD-172W is a 17-type, the LMD-232W is a 23-
type and the LMD-322W is a 32-type wide-screen LCD
monitor, and the LMD-152 is a 15-type and the LMD-
212 is a 21-type 4:3 LCD monitor.
High brightness LCD panel
Because of the monitor's high brightness, high contrast,
high speed response, and wide viewing angle
technology, it can be used under various lighting
conditions.
Rack mount monitors (LMD-152, LMD-
172W and LMD-212 only)
The LMD-152/172W/212 can be installed in a standard
19-inch rack using each optional Mounting Bracket
MB-524, MB-522A or MB-523. This is essential when
space is paramount in crowded OB vehicles.
Optional monitor stand with tilt function
The LMD-152/172W/232W/212 can be installed on the
optional SU-558 monitor stand, and the LMD-322W on
the optional SU-559 floor stand. Thanks to the tilt and
height adjustment functions of the SU-558 monitor
stand, the display screen height is adjustable to position
with other equipment.
Lightweight, thin design
The lightweight, thin design reduces the load for an OB
vehicle and the space needed for installation.
3-color tally lamp (except for the LMD-
322W)
The tally lamp lights in red, green or amber to monitor
each input picture and check the on-air mode.
UK, Ireland, Australia, New
Zealand
1)
–
VM0303B
CEE (13) 53rd (O,C)
10A/250V
VDE
5
GB
Features