Identification Of The Power And Grounding Terminals - WEG CFW700 Manual Del Usuario

Installation and Connection

3.2.1 Identification of the Power and Grounding Terminals

R/L1 S/L2 T/L3 DC-
Ground
(a) Frame sizes A, B and C
R/L1 S/L2 T/L3 DC-
Ground
(b) Frame sizes B and C with degree of protection IP55
R/L1 S/L2 T/L3 DC-
Ground
(c) Frame size D
12 | CFW700
BR DC+ U/T1 V/T2 W/T3
Ground
BR DC+ U/T1 V/T2 W/T3
Ground
DC+ U/T1 V/T2 W/T3
BR
Ground
R/L1, S/L2, T/L3: AC power supply.
DC-: this is the negative potential
terminal in the DC bus circuit.
BR: braking resistor connection.
DC+: this is the positive potential
terminal in the DC bus circuit.
U/T1, V/T2, W/T3: motor connection.