Calling Up Tones (Patches); Specifying What Happens When You Switch Banks; Changing Tone Settings (Memory Edit Mode) - Boss ME-80 Manual Del Usuario

Calling Up Tones (Patches)

To switch patches, use the [BANK
number pedals (1-4) .
1.
Press the [BANK ] or [BANK
Choose the bank number to which you want to switch .
U1 U9
User Bank ( – )
Preset Bank ( P1 – P9 )
2.
Press any one of the number pedals from [1] through [4] .
The unit switches to the patch within the bank number you chose
in Step 1 .
TIP
When you're selecting a patch within the same bank, you can
skip Step 1 .
Specifying What Happens When You
Switch Banks
You can set the unit to change a patch to the next patch
immediately, or to not change to the next one until the number
pedal is pressed when you switch the bank with the [BANK
[BANK ] pedals .
Refer to "Making Global Settings (System Settings)" (p . 18) for how to
set .
Value Explanation
When you press the bank pedal to switch the bank, the patch
doesn't change although the display changes . The bank and
H0
the patch number are confirmed by pressing the number pedal,
then the patch changes to the next one .
The patch changes to the next one as soon as you press either
H1
the bank pedal or the number pedal .
] and [BANK ] pedals and the
] pedal .
] and
Saving/Calling Up Tones (Memory Mode)
Changing Tone Settings (Memory
Edit Mode)
In Memory Mode, you cannot turn effects on and off . If you want to
turn effects on and off, or change the tone settings, put the unit in
Memory Edit Mode .
1.
Refer to "Calling Up Tones (Patches)" (p . 13) and call up the
patch whose settings you want to change .
2.
Press the [EDIT] button .
Ed
" " appears in the display . The unit switches to Memory Edit Mode .
3.
Use the controls, pedals, and buttons to modify the tone .
In Memory Edit Mode, the pedal switches turn effects on and off
just like in Manual Mode .
4.
If you want to save the tone whose settings you've
changed, save the patch in the order of "Saving Tones
(Patch Write)" (p . 12) .
Until you perform a patch-write operation, switching off the power
or changing patches will cause tones you've created to be lost .
13