Installation And Adjustment; Tools; Manner Of Delivery; Adjusting Of The Footrests - Vermeiren Jazz S50 Manual De Instrucciones

3

Installation and adjustment

The instructions in this chapter are for the specialist dealer.
The Vermeiren Jazz S50 has been designed as wheelchair with a minimum of adjustments.
There is no need for extra stock of spare parts.
To find a service facility or specialist dealer near you, contact the nearest Vermeiren facility.
A list of Vermeiren facilities can be found on the last page.
L WARNING:
Risk of unsafe settings - Use only the settings described in this
manual.
L WARNING:
Variation of allowed adjustments can still change the stability of your
wheelchair (tilt back or sideways).
3.1

Tools

To set up the wheelchair the following tools are needed.

Wrench set n° 7 to n° 22

Allen key set n° 3 to n° 8

Screwdriver Phillips head
3.2

Manner of delivery

The Vermeiren Jazz S50 shall be delivered with:

1 frame with armrests, rear and front wheels (seat height of 500 mm)

1 pair footrests

Tools

Manual

Accessories (optional)

Tyre pump
3.3

Adjusting of the footrests

3.3.1 Length of the footrests

L CAUTION:
Risk of damage – Avoid that the footrests make any contact with the
ground. Keep a minimum distance from 60 mm above the ground.
Adjust the length of the footrests as follow:
1. Remove the screw
2. Adjust the length of the footrest to a
comfortable length.
3. Tighten the screw
Page 13
Jazz S50
2018-07

.

properly.