Operation; Operation Modes - Yamaha MusicCast MCX-CA15 Manual Del Propietário

Operation modes

The MCX-CA15 features three different operation modes for user flexibility. Before using the MCX-CA15,
you must set the operation mode to either "A", "B" or "C" depending on your system configuration.
CAUTION
Be sure to set the operation mode before connecting the MCX-CA15 to a live power source.
Operation Modes
Mode
A mode Use this mode if you want to use the MCX-CA15 as a companion to a client. In this mode you can
also control a YAMAHA AV receiver connected to the MCX-CA15 or I/O box from the client's
A B C
remote control using YAMAHA AV link technology. In this mode, the MCX-CA15 is fully
controllable from the client.
MODE
B mode Use this mode if you want to use the MCX-CA15 as an amplifier for a system other than the
MusicCAST system and you also want to automatically turns on the MCX-CA15 or switches it to
A B C
sleep mode using input signals using the input level sensing function
MCX-CA15's power is controlled by audio signals input from the connected external component.
MODE
C mode Use this mode if you want to use the MCX-CA15 as an amplifier for a system other than the
MusicCAST system and you do not want to use the input level sensing function
A B C
the MCX-CA15's power is controlled by control signals input from the connected external
component.
MODE
*
For details on the input level sensing function, see page 11.
CAUTION
In "B" and "C" modes, you cannot adjust the volume level from the MCX-CA15. Signals
input through the AUDIO IN jack are not converted before being output. If loud sounds are
output, your speakers may be damaged. Before listening to components for the first time,
lower the volume on the component to minimum.
Notes
• In "B" mode, if no signal is detected for five minutes or longer, the MCX-CA15 enters sleep mode.
• In "B" and "C" modes, when a component is connected to the AUDIO IN jack, the input default setting is
"AUDIO IN". However, when no component is connected, the default setting is "AV IN".
• Before connecting or disconnecting an external component to/from the AUDIO IN jack, be sure to unplug
the MCX-CA15 from a live power supply.
8

OPERATION

Usage
*
. In this mode, the
*
. In this mode,