Other Functions; Automatic Store - Yamaha PDM-4220 Manual Del Usuario

OTHER FUNCTIONS

Automatic Store

Approximately 1 sec. after adjustment is completed, the adjustments will be recorded as shown in the table below.
Menu
Display
Picture
Picture Mode
Contrast
Brightness
Colour
Sharpness
Hue
Colour Temperature
Contrast Mode
YNR
CNR
Film Mode
PAL Comb Filter
LTI
CTI
Black Enhancement
Auto Colour
Colour Temp. Adjust
R Amplitude
G Amplitude
B Amplitude
R Cut Off
G Cut Off
B Cut Off
Colour Management
Magenta
Red
Yellow
Green
Cyan
Blue
Colour Decoding
Red
Green
Colour
Hue
Audio
Audio Mode
Treble
Bass
Balance
Dynamic Bass
Matrix Surround
Perfect Volume
Headphone Volume
Headphone Select
Registration condition
1 setting is registered.
For every input function and every
Picture Mode, 1 setting is
registered.
For every Colour Temperature, 1
setting is registered.
1 setting is registered.
For every input function and every
Picture Mode, 1 setting is registered.
1 setting is registered.
-
For every colour temperature, 1
setting is registered.
For every input function and every
Picture Mode, 1 setting is
registered.
1 setting is registered.
For every Audio Mode, 1 setting is
registered.
1 setting is registered.
For every Audio Mode, 1 setting is
registered.
Menu Display
Function Screen Saver
Screen Wipe
Black Side Panel
Video Power Save
Freeze Mode
Default Zoom
Panel Life
Luminance Manager
Setup System
Colour System
AV1
AV2
AV3
AV4
AV5
Video Input
AV1
AV4
Scart Output
RGB1
RGB2
Auto Adjust
Horizontal Position
Vertical Position
Horizontal Clock
Clock Phase
Input Level
Frequency Display
WVGA Type
WXGA Mode
Vertical Filter
Frequency Mode
Language
• The previously recorded items will be lost.
• The signal mode can be identified by the horizontal/vertical sync
frequency and the sync signal polarity. Different signals with which
all the elements are the same or similar will be handled as the
same signal.
Registration condition
1 setting is registered.
(not registered)
1 setting is registered.
1 setting is registered.
-
For every Input function, 1 setting
is registered.
-
1 setting is registered.
1 setting is registered.
(not registered)
For every signal mode, 1 setting is
registered. (Only for RGB2)
1 setting is registered.
1 setting is registered.
39