Publicidad
Idiomas disponibles
Idiomas disponibles
1.
Remove the lid of the milk frother.
2.
Insert the desired attachment (stirrer or frother).
3.
Pour milk into the container. Ensure that you do not exceed the maximum
level: Frothing 175 ml ("
4.
Close the lid of the milk container and ensure that it is fixed correctly.
5.
Place the milk container on the base unit. Connect the power cable to a
properly installed socket.
6.
Press the sensor button ("
frother to switch on the appliance.
Press the sensor button "ON/OFF" on the front of the base unit to select the desi-
red mode. An audible signal confirms the selection. And the (
glowing in red on the button (heating plate switched on). If the (
blue, then the heating plate is switched off and the content is not being heated.
If the appliance is started, then the milk frother is automatically switched off after
60-240 seconds. The container is subsequently filled with hot or cold milk froth de-
pending on whether you had switched the heating plate on or off ("red" or "blue"
mode). If you want to switch off or stop the appliance during operation, press the
sensor button ("
") once again.
English
";) Stirring 250ml ("
") on the front of the base unit of the milk
").
) symbol starts
) symbol is
33
Publicidad
