Fondital eBLITZ GD Serie Manual De Instalación, Uso Y Mantenimiento página 25

Without any template, mark the position of the holes according to the indications of the following tables:
DIMENSION A
Then follow the steps illustrated below:
1. Drill as indicated by the holes marked and then insert the blocks in the wall.
2. Insert the 4 screws without tightening them; put the two "A" brackets in place and then tighten the
screws.
1
Number of sections/power
5/600 W 6/1000 W 9/1200 W 10/1500 W 12/1800 W
239 mm 319 mm 558 mm 558 mm
EN
797 mm
25