Menu System Explanation - Husqvarna PP220 Manual De Instrucciones

Menu system explanation

DRIVE CHOICES (1)
DRIVE CHOICES
SET GEAR (5)
SELECT GEAR
Not applicable for PP220.
SET DRIVE MODE (6)
SELECT DRIVE MODE
Not applicable for PP220.
SET ROT. DIR. (7)
Select the required direction of rotation.
The direction of rotation can only be altered when the
blade/wire is not moving. Choose from between the
following options:
• STANDARD
• REVERSE
SET FUSE (8)
SET FUSE
Not applicable for PP220.
SET WATER VALVE (9)
Regulate the water valve.
Not applicable for PP220.
SETTINGS (2)
SETTINGS
RUN TIME (10)
RUN TIME
TIME COUNTER (10)
On activation, a stop-watch is started to count the time the
blade/wire rotates and at least one feed is active.
CLEAR RUN TIME
Used to reset the stop-watch.
TIME AND DATE (11)
Set time and date.
SET TIME
State the current time.
SET DATE
State the current date.
18 – English
MENU SYSTEM
TIME FORMAT
Select the required time format. Choose from between the
following options:
• 12 h
• 24 h
DATE FORMAT
Select the required date format. Choose from between
the following options:
• YYYY-MM-DD
• YYYY/DD/MM
• DD/MM/YYYY
LANGUAGE (12)
Select the required display language.
SET UNITS (13)
Select the required units. Choose from between the
following options:
• AMERICAN
• METRIC
PAIR RADIO (14)
Pair the remote control with machine.
RADIO CHANNEL (15)
RADIO CHANNEL
The radio channel must be changed when the operator
experiences disturbance or loss of communication.
The remote control must be connected to machine with a
CAN cable.
Select the required radio channel. Choose from between
the following options:
• 0 (2.410 GHz)
• 1 (2.415 GHz)
• ...
• 11 (2.465 GHz)
PRODUCT INFO (4)
Information about the unit and the connected tool is
shown.