Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
For the installation, have ready six commercially available mounting screws,
anchor bolts, etc. that are appropriate for the wall.
The type and length of the screws required depend on the material and
strength of the wall. If you do not know which material your wall is made of,
consult your Sony dealer or qualified service personnel.
Step 1: Check the parts
Check all the parts are included in the package.
Bracket A (1)
Step 2: Decide the installation location
Decide the location on the wall to install the TV.
Then, place bracket A on the installation location and mark the four screw
holes on the wall using a pencil.
Before marking, make sure that the distance between the upper edge of bracket
A and the ceiling and that between the side edge of bracket A and the side
wall are 20 cm (7
20 cm (7
/
inches)
7
8
or more
Note
Attach bracket A level with the floor.
4
/
inches) or more.
7
8
Ceiling
Bracket A
20 cm (7
or more
Wall
For Sony Dealers
Bracket B (1)
/
inches)
7
8
Screw (2)
Mark this
portion using
a pencil.
Publicidad
Tabla de contenido
