NSK Ti-Max X X450L Manual Del Usuario página 13

7-5 Lubrication
NSK PANA SPRAY Plus
X450L/X450/X450KL/X450SL/X450BLED/X450WLED
Apply NSK PANA SPRAY Plus every time after each use and/or before autoclaving.
1) Remove the bur from the handpiece.
2) Insert the Spray Nozzle into the Spray Port nozzle on the can.
3) Insert the Spray Nozzle in rear of the handpiece. Hold the handpiece and spray for approximately 2-3
seconds. Apply lubricant until it expells from the handpiece head for at least 2 seconds. (Fig. 9)
X450M4
1) Remove the handpiece from the hose.
2) Mount the arrow-head spray nozzle tip into the spray can port. (Fig. 10)
3) Insert the Spray Nozzle into the Drive Air Port of the handpiece. Hold the handpiece and spray for
approximately 2-3 seconds. Apply lubricant until it expells from the handpiece head for at least 2
seconds. (Fig. 11)
Spray Nozzle
Handpiece
PANA SPRAY Plus
Arrow-head Spray Nozzle
Handpiece PANA SPRAY Plus
Fig. 10
Fig. 9
11