NSK Ti-Max X X450L Manual Del Usuario página 14

CAUTION
· When applying spray be sure to hold the handpiece firmly to prevent the handpiece from slipping out
of the hand due to the spray pressure.
· Hold the spray can upright.
Lubrication Oil (X450M4)
1) Remove the handpiece from the hose.
2) Apply 1-2 drops of lubrication oil into the Drive Air Port shown in the Fig. 11.
3) Connect the handpiece to the hose. Operate the handpiece for about 10 seconds.
Chuck cleaning
Clean Push Button chuck once a week.
1) Mount the arrow-head spray nozzle tip into the spray can port.
2) Lubricate the chuck for 1 to 2 seconds directly through the bur insertion hole. (Fig. 12)
3) Lubricate handpiece by using NSK PANA SPRAY Plus or Care3 Plus.
12
Midwest 4-hole
Drive Air Port
Fig. 11
Hole for bur attachment
Fig. 12