NSK Ti-Max X X450L Manual Del Usuario página 7

X450L/X450 (1) Connection
1) Insert the handpiece into the Coupling.(Fig. 2)
2) Make sure the handpiece is firmly connected to the coupling.
(2) Disconnection
Pull back the Retention Lock Ring and remove the handpiece from the Coupling.(Fig. 2)
CAUTION
Do not operate the Retention Lock Ring while under drive air pressure. The high pressure may cause
sudden release of the handpiece from the coupling.
X450M4 (1) Connection
1) Insert the handpiece correctly into the hose connector and tighten the hose nut.(Fig. 3)
2) Make sure the handpiece is connected firmly to the hose.
(2) Disconnection
Loosen the Hose Nut and remove from the Hose.
Retention Lock Ring
Handpiece Coupling
Tighten
Handpiece Hose Nut
Fig. 2
Fig. 3
5