Intended Use; Charge State Indicator; Items Supplied - Hilti SL 6-A22 Manual De Usuario

3.2 Intended use

The product described is a cordless floodlight. It is for lighting up jobsites.
The lamp head can be pivoted horizontally and vertically. Additionally, the
light can be set on a flat surface, suspended from various construction
materials by means of the integral hook, or mounted on a tripod with 5/8"
thread.
▶ Use only Hilti Li­ion batteries from the B 18 / B 22 series with this product.
▶ Use only the Hilti battery chargers of the C4/36 series to charge these
batteries.

3.3 Charge state indicator

Lightly press (no more than until resistance is perceptible) either of the
battery release buttons to check the charge state of the Li­ion battery.
Status
4 LEDs light up.
3 LEDs light up.
2 LEDs light up.
1 LED lights up.
1 LED flashes.
If the LEDs of the charge state indicator flash, follow the instructions in
the 'Troubleshooting' section.

3.4 Items supplied

Cordless lamp, operating instructions.
Other system products approved for use with this product can be found at
your local Hilti Store or online at: www.hilti.group | USA: www.hilti.com
3.5 4-mode switch
Use the 4-mode switch to set brightness.
Status
Press once
Press twice
Press three times
Press and hold down for several
seconds
4 English
Printed: 22.10.2018 | Doc-Nr: PUB / 5458888 / 000 / 00
Meaning
• Charge state: 75 % to 100 %
• Charge state: 50 % to 75 %
• Charge state: 25 % to 50 %
• Charge state: 10 % to 25 %
• Charge state: < 10 %
Meaning
• The lamp shines at maximum
brightness (100 %).
• The lamp shines at reduced
brightness (66 %).
• The lamp shines at reduced
brightness (33 %).
• The lamp is off.
2195846
*2195846*