Publicidad
Idiomas disponibles
Idiomas disponibles
AVENTICS
| RTC-CG and HD | R402005942–BDL–001–AB | English
3
Available Parts Kits
Parts kit for the shock absorber holder
R402005896
RTC-CG
R402005897
Part number
R402005898
R402005899
RTC-HD
R402005900
Part number
R402005901
1 Holder for shock absorber
1 Stop sleeve
Contents
4 M6x30 screws
2 Centering rings
1 Set of assembly instructions
The holders for the shock absorber are specific to
the rodless cylinder type.
Please note:
The shock absorbers are not included
in the parts kit and must be ordered separately!
(See the calculator or online catalog.) Select the
necessary shock absorbers that correspond to
their load.
Parts kit for the clamping plate
Part number
R402005902
1 Adjustment plate
3 M6x16 screws
Contents
1 Clamping plate
3 T-groove nuts
1 Set of assembly instructions
Parts kit for the intermediate stop
Part number
R402005904
for cylinders
RTC CG/HD 25–40mm
1 Intermediate stop
3 M4x25 screws
Contents
3 Centering rings
1 Set of assembly instructions
Parts kit for 15X120 profile (optional)
Part number
R412019227
1 Strut profile
2 Covers
1 Clamping piece
Contents
6 M6x12 screws
6 T-groove nuts
1 Set of assembly instructions
Ø 25 mm
Ø 32 mm
Ø 40 mm
Ø 25 mm
Ø 32 mm
Ø 40 mm
4
Product Overview
Parts kits for the RTC series rodless cylinders
The parts kits to be installed are indicated in gray in the
figure.
4
1 Parts kit for the shock absorber holder
2 Parts kit for the clamping plate
3 Parts kit for the intermediate stop
4 Parts kit for 15X120 profile
5 Shock absorber (must be ordered separately)
Parts kit for the shock absorber holder
The holder for the shock absorber is secured to the side of
the slide. The intermediate-stop detent stops the slide at
the slide's shock absorber.
4
3
1 Holder for shock
absorber
2 M6 screws
1
2
3 Stop sleeve
4 Centering rings
2
1
5
2
3
2
Publicidad
