Brandt BFU662LNW Guia De Instalacion página 33

Place the appliance in a dry, well ventilated room.
•
WARNING! The appliance should not be operated in an
unheated room or porch. Place the appliance away from
heat sources such as kitchen stove/oven, radiators, or direct
sunlight.
WARNING! The appliance must not touch any pipes for
heating, gas or water supply or any other electrical devices.
Attention! If the appliance
•
is placed in a corner, a gap of
at least 235 mm must be left
between the appliance body
and the wall so that the
refrigerator or freezer door
can be opened enough (see
fig.).
POSITIONING
◄ Do not cover the ventilation holes at the top of the appliances–
•
it must be a good air circulation around the appliance. There
should be a gap of at least 10 cm between the top of the
appliance body and any furniture that may be above it. If this
requirement is not followed, the appliance consumes more
electrical energy and its compressor may overheat.
The appliance must stand on a level surface and must not touch
•
the wall. If necessary, regulate the height of the appliance by
adjusting the levelling feet: by turning them clockwise – the front
of the appliance rises, by turning them counter clockwise – it
comes down. If the appliance is tilted slightly backward – the
doors will close by themselves.
BFU662LNW, BFU662LNX
◄ Attention! If the appliance is placed in a
•
niche, a gap of at least 1210 mm must be left
between the walls, furniture or other appliances
so that the refrigerator and freezer doors can
be opened enough (see fig.).
5
BFL5636BW, BFL5636BX