Descargar Imprimir esta página

Pressure Washer Maintenance - Craftsman 580.754880 Instrucciones De Uso

Publicidad

Idiomas disponibles

Idiomas disponibles

OWNER'S
RESPONSIBILiTiES
Follow the hourly or calendar intervals, whichever
occurs first. More frequent service is required when
operating in adverse conditions noted below.
*
Change engine oil
®
®
®
®
®
®
Check/clean
water inlet screen _
Check high pressure hose
Check detergent siphoning hose
Check spray gun and assembly for leaks
Clean debris
Check engineoil level
®
®
®
Clean engine air cleaner
Change engine oiF
Inspect muffler and spark attester
®
Replace engine air cleaner
®
Replace spark plug
®
Clean cooling system _
1 Clean if clogged.
Replace if perforated or torn,
2 Service more often under dirty or aus_y cona_tions
General
Recommendations
Regular maintenance will improve the performance and
extend the life of the pressure washer. See any Sears
or other qualified service dealer for service.
The pressure washer warranty does not cover items
that have been subjected to operator abuse or
negligence. To receive full value from the warranty, the
operator must maintain pressure washer as instructed
in this manual including proper storage as detailed in
Storage.
Some adjustments will need to be made periodically to
properly maintain your pressure washer.
AHservice and adjustments should be made at least
once each season. Follow the requirements in the
Maintenance Schedule chart above.
NOTICE
Once a year you should clean or replace the
spark plug and replace the air filter. A new spark plug
and clean air filter assure proper fueFair mixture and
help your engine run better and last longer.
Pump
Oil
DO NOT attempt any oil maintenance on this pump.
The pump is prequbricated and sealed from the
factory, requiring no additional maintenance for the life
of the pump.
Emissions
Control
Maintenance,
repJacement,
or repair of the
emissions
contro_ devices
and systems
may
be performed
by any non-road
engine repair
establishment
or individual.
However, to obtain
"no charge" emissions control service, the work must
be performed by a factory authorized dealer. See the
Emissions Warranty.
Before
Each Use
1.
Check engine oH level
2.
Clean debris.
3.
Check water inlet screen for damage.
4.
Check high pressure hose for leaks.
5.
Check gun and nozzJe extension assembly for leaks.
6.
Purge pump of air and contaminants.
PRESSURE WASHER MAINTENANCE
Clean Debris
Daily or before use, clean accumulated debris from
pressure washer. Keep linkage, spring and controls
clean. Keep area around and behind muffler free from
any combustible debris. Inspect cooling air slots and
openings on the pressure washer. These openings
must be kept clean and unobstructed.
Pressure washer parts should be kept clean to reduce the
risk of overheating and ignition of accumulated debris.
® Use a damp cloth to wipe exterior surfaces clean.
NOTICE
Improper treatment of pressure washer
could damage it and shorten its life.
, DO NOT insert any objects through cooling stots.
® Use a soft bristle brush to loosen caked on dirt, oil,
etc.
® Use a vacuum cleaner to pick up loose dirt and
debris.
Check
and C_ean tnlet Screen
Examine garden hose inlet screen. Clean if it is
clogged or replace if it is torn.
17

Publicidad

loading