StetSom MOTO DUPLO i Manual De Usuario página 6

INTEGRATED ANTI-THEFT SYSTEM
5
5.1. ANTI-THEFT FUNCTION IN NEUTRAL
If the motorcycle is put in neutral while the igniti on is on, the anti -theft functi on is
acti vated. The MASTER BUTTON needs to be pressed within 3 minutes or the alarm will
give a 10 second warning before entering lock down (see table secti on 12, functi on 6).
5.2. ANTI-THEFT FUNCTION USING THE IGNITION
Every ti me the igniti on is turned on the MASTER BUTTON needs to be pressed within
3 minutes or the alarm will give a 10 seconds warning before entering lock down (see
secti on 11).
ANTI-THEFT BY PRESENCE
6
Acti vate and then deacti vate periodic transmission:
Hold and then press the bu� on . The control's led light will turn off and then blink
1 ti me for acti ve periodic transmission or 2 ti mes for deacti vated periodic transmission.
To cancel the lock down, press the
In order to deacti vate the control unit without the remote control, turn on the
igniti on and press the MASTER BUTTON. If the presence functi on is acti vated, the
locks menti oned in secti ons 5.1 (ANTI-THEFT FUNCTION IN NEUTRAL) and 5.2
(ANTI-THEFT FUNCTION IN THE IGNITION) will not be functi oning.
7 TESTING LOCK DOWN BY PRESENCE
Turn the igniti on on and turn off the periodic transmission of the control
(see secti on 1). Wait the specifi ed ti me unti l lock down.
8 VALET PARKING FUNCTION
If you need to leave your motorcycle at the mechanic, carwash, a place with valet
service, etc..., you can acti vate this functi on without showing them where the master
bu� on is or giving them the remote control.
Press the master bu� on 3 ti mes, it will emit 2 beeps and the locks menti oned in
secti ons 5.1, 5.2 and 6 will be temporarily disabled. Each ti me the igniti on is turned on
or off , 2 beeps will sounds to warn the user that the motorcycle is unprotected. To re-
acti vate the anti -theft functi on, press the MASTER BUTTON once. If using the presence
functi on, you need to press on the presence control near the motorcycle.
Press
3 quick taps on the Disables the locks menti oned in
MASTER BUTTON secti ons 5.1, 5.2 and 6
1 quick tap on the Enables the locks menti oned in
MASTER BUTTON secti ons 5.1, 5.2 e 6 (If enabled)
10
on the presence control.
Functi on Alarm Response
Siren emits 2
beeps
No beeps
DISABLE / DISARM THE ALARM WITHOUT THE CONTROL
9
This secret bu� on needs to be installed in a concealed but easily accessible place. From
this bu� on, you can deacti vate the control panel without the control by turning the
igniti on on and touching the MASTER BUTTON.
PROGRESSIVE LOCK CYCLE
10
LOCK UNLOCK
FOR 2 SECS. FOR 10 SECS.
COMPLETELY UNLOCK
LOCKED FOR 2 SECS.
AUTOMATIC LOCK
11
Confi rm this functi on is working. If the motorcycle does not detect anything on any of
the sensors in 1 minute, the alarm will acti vate automati cally and the siren will give one
beep (see table secti on 12, functi on 8).
PROGRAMMING
12
ALARM TURN ON PRESS THE
DISABLED IGNITION MASTER BUTTON
1 BEEP ACTIVATED RELEASE THE MASTER BUTTON
2 BEEPS DEACTIVATED
Nº of Beeps Functi on
1
Programming controls
2
Enable/Disable alarm permanently
3
Enable/Disable with blinkers
4
Enable/Disable with siren
5
Time unti l lock down: 1:30 min or 3 min
6
Anti -theft in NEUTRAL
7
Anti -Theft in IGNITION
8
Automati c Lock
9
Accelerometer
10
Factory Confi guarati ons
Aft er the 10th beep, if it is not released the butt on will not change the current setti ng.
LOCK UNLOCK
FOR 2 SECS. FOR 5 SECS.
LOCK
FOR 2 SECS.
LISTEN CONSECUTIVE
BEEPS OF THE FUNCTIONS
AT THE DESIRED FUNCTION
Defaut Confi g.
Enable
Enable
Enable
3 minutes
Disable
Disable
Enable
Enable
11