Introduction; Equipment - ESAB Warrior 400i CC/CV Manual De Instrucciones

GB
2

INTRODUCTION

The Warrior 400i CC/CV and Warrior 500i CC/CV are welding power sources
intended for MIG/MAG welding, as well as for welding with powder filled cored wire
(FCAW-S), for TIG welding, for welding with coated electrodes (MMA) and for arc air
gouging.
The power sources are intended for use with the following wire feed units:
S
Warrior Feed 304
S
Mobile Feed 300
ESAB's accessories for the product can be found on page 51.
2.1

Equipment

The power sources are supplied with:
S
5 m return cable with contact clamp
S
3 m mains cable
S
instruction manual
bu21e
- 37 -
© ESAB AB 2013