Quick Installation - Tripp-Lite OMNIVS800 Manual Del Propietário

Quick Installation

Plug the UPS into an outlet.
1
NOTE! after you plug the UPS into a live
AC outlet, the UPS will turn ON
automatically. See "ON/OFF" Button
description in the Basic Operation section
if you want to place the UPS in any mode
other than ON.
Note: UPS system will function properly upon initial
startup; however, maximum runtime for the unit's
battery will only be accessible after it has been
charged for 24 hours.
Plug your equipment
2
into the UPS.
The outlets will provide battery backup and
A
surge protection; plug your computer, monitor
and other critical devices here.* The
outlets will provide surge protection only; plug
your printer and other non-essential devices
here.
* Your UPS is designed to only support computer
equipment. You will overload the UPS if the total VA
ratings for all the equipment you connect to the (A)
outlets exceeds the UPS's Output Capacity (see
Specifications). To find your equipment's VA ratings,
look on their nameplates. If the equipment is listed
in amps, multiply the number of amps by 120 to
determine VA. (Example: 1 amp × 120 = 120 VA).
If you are unsure if you have overloaded the (A)
outlets, run a self-test (see "MUTE/TEST" Button
description).
14-04-093-932248.indb 3
1
A
B
OMNIVS800 shown
2
A
OMNIVS1000 shown
2
A
OMNIVS1500XL shown
2
3
NORM DELAY
A
B
NORM DELAY
A
B
NORM DELAY
A
B
4/30/2014 4:47:37 PM