Safety Information; Aa Bolt; Bb Washer; Cc Wood Dowel - Twinstar Home 26MM4995 Instrucción De Montaje

SAFETY INFORMATION

WARNING
• Before assembly, carefully use scissors or utility knife to cut and unwrap all parts.
Make sure you do not discard the hardware.
CAUTION
• Use care in assembling your new fireplace. Take your time and use the hardware
provided and a quality Phillips head screwdriver. Never overtighten bolts.
• Do not sit on any part of the mantel.
• All panels are labeled left and right as viewed from the front of unit.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and diagram above. If any part is missing or damaged, do not attempt to
assemble, install or operate the product. Contact customer service for replacement parts.
Estimated Assembly Time: 60 Minutes
Tools Required for Assembly (not included): Phillips head screwdriver, scissors and utility knife
To better protection of your product, please assemble the product on a scratch free groud, and
put a soft material over the groud surface.
ASSEMBLY INSTRUCTIONS
1. Insert Wood Dowels (CC) to the holes on the
Hearth/Base (A), push Left Foot (O) and Right Foot
(P) snug to the Base Panel, put Bolts (AA) and
Washers (BB) through the pre-drilled holes in the
Hearth/Base (A) and then tighten.
Attach Support Foot (Q) to Hearth/Base (A), using
Bolts (DD) through the pre-drilled holes in the
Hearth/Base (A) and tighten.
Hardware Used
AA
Bolt
BB Washer
CC Wood Dowel
DD
Bolt
Fig. 1
x 10
CC
x 10
x 6
x 2
4
Q
A
BB
O
AA
DD
P
BB
AA