Teac LPR550USB Manual Del Usuario página 31

Using the audio timer
This unit can start and stop recording together with the
commercially available audio timer .
< Connect the unit's power cord to the outlet of the audio timer
before setting .
1 Set the unit's ON/OFF times with the audio timer.
Refer to the instruction manual of audio timer for operations .
Caution when using the audio timer
< When a CD-R or CD-RW disc is loaded, it will take approximately
30 seconds after the unit turns on to read and start recording .
Set the on time of the audio timer approximately 1-2
minutes before you want to start recording.
< The unit will automatically start finalize when the disc reaches the
end during recording . If the power turns off during recording, the
error will occur and the disc will be no usable . When the audio
timer is used, set the off time of the audio timer 3 to 5 minutes
longer than the recording time of the unit .
2
Turn on the audio timer outlet.
Refer to the instruction manual of audio timer for operations .
3 Set the recording time.
1 5
Follow the steps to on page 30 .
4 Turn off the audio timer outlet.
Refer to the instruction manual of audio timer for operations .
The unit will turn on and the recording will start when the audio
timer reaches the ON time .
When recording starts, the REC OFF timer and the remaining time
display will start to change .
Recording will stop when reaches to "00:00" .
The unit will turn off when the audio timer's reaches the OFF
time .
Refer to the following example to set the recording time of
the unit and off time of the audio timer.
AM7:59:00
< Audio timer reaches on time
< Unit turns on
After disc reading
< Recording timer starts
< Recording starts
00 Sec .
Display shows the recording time "65:00" .
Unit's finishes working: Including time for finalizing, etc .
While the recording time decreases
from "65:00" to "00:00" .
When the display shows
AM9:00
"00:00"
AM9:04
< Recording time finishes
< Recording finishes
AM9:08:00
< Audio timer reaches the off
time
< Unit turns off
If you want to record an FM radio program from "AM8:00" to
"AM9:00", set the recording time of the unit to "65:00" first, then
set the ON time of audio timer to "AM7:59" and OFF time to
"AM9:08" .
Once the audio timer reaches the on time, the unit will turn
on and the disc will be read . Approximately 30 seconds later,
recording will start . At the same time, the display for the
recording time will start to decrease, and recording will stop
when the display shows "00:00" . The unit will turn off when the
audio timer reaches the off time .
AM8:00
60 Sec .
31