Baby auto irbag top Manual De Uso página 30

5. Tighten the lap belt and diagonal shoulder belt,
then place the red safety clip
shoulder belt tongue as near to the vehicle
anchor point as possible without touching it! (4.7,
4.8, 4.9 & 4.10).
Make sure the vehicle's safety belt is not twisted,
also check that the seat cover does not impede the
movement of the vehicle's safety belt or prevent the
installation of the seat in any way. To release your
child unbuckle the vehicle safety belt as described in
the instructions.
5. aDJUSTiNg CHilD SEaT.
Fastening & Unfastening the harness
1. Join the 2 buckle metal connectors, pass both
connectors through the slot in the upper part of
the buckle until you hear a "click" (5.1).
2. To unfasten the harness press the red button on
the buckle downwards (5.2).
loosening the harness
3. Release the buckle by sliding the red
downwards and at the same time pulling out the
harness (5.3).
Tightening the harness
4. Pull the harness straps up to remove the slack
from the lap section of the harness, then pull the
harness regulating strap until the harness is fully
stretched (5.4).
5. The harness should be as tight as possible without
causing discomfort to your child.
6. Make sure the lap section of the harness is
positioned as low as possible, surrounding your
child's hips and not his stomach.
30
Ensure that the belt has no slack.
(N) on the diagonal
(F)
button