Changing A Snap-On Presser Foot - Singer 6038 Manual De Instrucciones

SINOER
11
Changing a
snap-on presser
foot
TURN DFF THE MACHINE BEFDRE CHANGING
A
PRESSER
FDDT .
Your machine is assembled with a general purpose
presser foot. Vou may easily replace it by any other
presser feet, which are inserted in the same shank by
following the instructions:
1. Turn hand wheel toward you until the needle is in its
highest position and lift presser foot.
2. Uft lever "A" slightly up. The presser foot will snap off
the shank (illustration 1).
3. Place the new presser foot with its pin under the
center of shank fitting. Lower presser foot and it will
be firmly connected (illustration 2).
1
2