Preparing To Lift The Saw - skilsaw SPT88 Instrucciones De Funcionamiento

Preparing to Lift the Saw

1. Set the bevel angle at 0° and lock it in
place, using the bevel-lock lever.
2. Lock both side extension tables in the
inward positions.
3. Rotate the table to either 60° right or 50°
left and lock it in place with the miter-lock
knob.
4. Lock the sliding rail system.
5. Lock the saw head in the DOWN position
with the head-assembly lock pin.
Lift The Saw by The Top Carry Handle
Grip the saw by the top carry handle. (Fig. 15b).
Continue to lift and transport comfortably.
Lift the Saw by the Side Carry Handles
Use upright, good posture and grip the two
handle areas beneath the extension tables
(Fig. 15c).
TRANSPORTING AND MOUNTING
FIG. 15a
FIG. 15b
FIG. 15c
23