Location Name; Print Receipts; Email Overdue Now; Synch All - MSA Galaxy Manual De Instrucciones

Location Name

• This selection allows the customization of a Test Stand location
name by the user.
• This name can be up to eight characters and will be used to
tag information provided to the network interface and memory
card.
Use á, â, and ENTER (8 ) to select each individual character of
•
the location name.
• All eight characters must be entered (use spaces for unwanted
characters if needed).
NOTE: The following options are only available on "MASTER" Test
Stands (Test Stands that do not have another Test Stand con-
nected on the right).

Print Receipts

Use á, â, and ENTER (8 ) to select ON or OFF to enable or
•
disable print receipts.
• A test receipt will print when this option is turned ON.

Email Overdue Now

• This selection immediately sends out an email message for each
overdue instrument located in the internal database.
• Before using this option, make sure to properly set up email alerts
in the Network Interface (requires an email server –SMTP- and
valid email address).

Synch All

• This selection will copy the settings from the "MASTER" (rightmost)
Test Stand to all other Test Stands.
• Use of this command changes cylinder setup and may take up to
one minute.
• Make sure the "MASTER" Test Stand is set up with all
cylinders used in the setup and not just the ones needed by
itself.

Network Reset

• This selection will reset the network interface back to factory
default settings.
3-7