Tabla de contenido
Publicidad
Problem
Model doesn't move
Loss of Control
Doesn't Run Straight
Doesn't Stop
Doesn't reverse
Running Too Slowly
32
TROUBLE SHOOTING
Cause
Transmitter or chassis power switch is not ON.
Polarity or battery type is wrong.
Batteries have run down.
Batteries have run down.
Antenna is missing or not attached properly.
R/C model using same band (frequency) is nearby.
Main road or large steel pylon is nearby.
Steering Trim is not adjusted correctly.
Front and Rear Wheel Nuts are too tight.
Throttle Trim is not adjusted correctly.
Throttle Trim is not adjusted correctly.
Wrong action.
Batteries have run down.
Motor has lost power.
Rear Wheel Nuts are too tight.
Dust or foreign objects are inside gears.
Correction
Switch power on as per Instruction Manual P.14.
Check polarity and type as per Instruction Manual P.10~13.
Change batteries as per Instruction Manual P.17.
Change batteries as per Instruction Manual P.17.
Attach Antenna and as per Instruction Manual P.10,11
and extend transmitter antenna.
Run model in different area, or change the crystal
(P.20) for a different band.
Run model in different area.
Make adjustment as per Instruction Manual P.16.
Tighten Wheel Nuts as per Instruction Manual P.21.
Make adjustment as per Instruction Manual P.15.
Make adjustment as per Instruction Manual P.15.
Control properly as per instruction Manual P.15.
Change batteries as per Instruction Manual P.17.
Change to spare motor as per Instruction Manual P.25~28.
Tighten Wheel Nuts as per Instruction Manual P.21.
Turn the power switch OFF and clean out Gears.
Publicidad
Tabla de contenido
