Use Of The Manual; General Warnings - Silca SMART Manual De Uso

SMART Remote Programmer
This manual is an integral part of the device literature.
The manual gives informa on that the operator should know to use the device safely.
User Manual
This manual should be read carefully by all those using the Smart Remote Programmer. It is essen al for the
proper use and maintenance of the device.
The manual must be kept carefully throughout the life of the device, including the disposal stage. Keep it in a
dry place close to the machine where it is always at hand for the operator.
Device ID
The device has an ID plate showing the serial number located on the back .
Device references and name
Serial Number
Note: remove the rubber grip to see the ID data.
The device is in compliance with the following standards CE and cer fi ca ons FCC, IC .
The materials used in manufacture and the components employed in using the device are safe if the device is
used correctly and ensure that the machine complies to current standards.
1 - TO ENSURE PROPER RELIABLE OPERATION PLACE THE SMART REMOTE PROGRAMMER AWAY FROM ANY
SOURCES OF RADIO INTERFERENCE SUCH AS:
- CORDLESS PHONES
- ELECTRIC MOTORS
- NEON LIGHTS
- MODEM WI-FI
2 - PLEASE INSTALL THE SMART REMOTE PROGRAMMER SOFTWARE IN YOUR PC BEFORE CONNEC-
TING THE USB CABLE, THIS MIGHT TAKE A FEW MINUTES. ( See chapter SOFTWARE - OPERATING GUIDE )
- For document updates and to download new updates of the Smart Remote Programmer so ware
please check our website www.silca.biz - www.ilco.us periodically. ( See chapter SOFTWARE -
OPERATING GUIDE )
FOR MORE INFORMATION SEE www.silca.biz - www.ilco.us, AND SEARCH FOR "SRPSOFTWARE " .
SRPSOFTWARE

USE OF THE MANUAL

See Fig.5

GENERAL WARNINGS

ONLINE DOCUMENTATION
Copyright Silca S.p.A 2018
Certifi cation references
English
5