Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning and Storage
1. Switch off power supply and pull out plug.
2. Always clean all parts after use. Wash the cup, cover and blade holder with water and soap.
3. Never immerse the blender base (power unit) in water or any other liquid, nor flush under the
faucet. Clean the machine with a wet cloth.
4. This appliance must be stored in a dry place. Avoid direct exposure to the sun.
5. Before storing the product, make sure that the product is clean and dry.
Common problems and solutions
Problem
Blender does not work
Abnormal smell comes
from motor unit during
operation
Blade or motor unit is
stuck during operation
Stirring cup leaks
Should hot material be
poured into the mixing
cup?
Check if power plug is inserted and mixing cup is correctly
placed on the blender base.
For the first several operations, it is normal for a new product
to cause some smell or smoke, and the phenomenon would
disappear after several operations. In addition, an appliance
working for a long time continuously could also cause smell or
smoke. If this is the case, shut down the product and cool it
down for 60 min.
Turn off, take the mixing cup away from the blender base and
scrap raw material on the blade with a spatula. Then, process
smaller quantities each time.
Turn off, take the mixing cup away from the blender base and
pour out its contents. Then unscrew anticlockwise the blade
holder and check if the sealing ring is correctly installed on the
blade holder.
No, to prevent damage and injuries, the liquids, fruits or
vegetables must cool down to 40
the cup for blending.
Solution
o
C before placing them into
8
Publicidad
Tabla de contenido
