Cleaning And Maintenance - HJM HRV608 Instrucciones De Uso

Hervidor Agua HRV608_Maquetación 1 11/08/15 09:21 Página 19
OVERHEATING SAFEGUARD
The jug kettle is fitted with an overheating safeguard. This will switch
off the jug kettle if it is operated without (sufficient) water. Allow the
jug kettle to cool down for at least 10 minutes before using it again.

CLEANING AND MAINTENANCE

• Remove the plug from the wall socket, and allow the appliance to
cool.
• Clean the jug with a damp cloth. Never immerse the appliance in
water. Never put the appliance in a dishwasher. Make sure that the
electrical connections do not become damp.
• If the interior of the jug has become severely discoloured, then the
best way to clean it is with a damp cloth and a little washing soda.
After cleaning, rinse the jug very thoroughly.
ATTENTION
• Never use corrosive or scouring cleaning agents or sharp objects
(such as knives or hard brushes) to clean the appliance.
• Before cleaning, make sure that the appliance is not connected to
the power supply and that it has cooled down.
DESCALING
Lime will be deposited on the heating element at a rate depending on
the hardness of the water. For this reason the heating element must
be cleaned at regular intervals.
1. Remove the plug from the wall socket, and allow the appliance to
cool.
2. The jug kettle is fitted with a descaling filter. This filter must be
removed for cleaning. Figure 2 shows how to remove (A) and
replace (B) the filter.
- 19 -