Joerns Healthcare Oxford Stature Manual De Instrucciones página 6

Oxford
®
Stature
2.
Fit the legs to the chassis using two 6mm countersunk screws per leg as provided.
NOTE:
There is a left and a right leg and they are configured as shown below
3.
Using Allen Key provided, tighten the 6mm screws located on each side of the chassis.
The screws should be secured firmly.
4.
Insert the curved boom section into the boom carriage. Secure the assembly by inserting the
two 6mm countersunk screws into the blue capping plate provided in the fastener kit, as shown
below and tighten firmly.
6
294000.10017 Rev. C
WARNING
E ng lish