Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
WWW.PREMIERMUNDO.COM
REMOTE HANDSET OPERATION
Slide the battery cover to remove it. Insert two batteries (size AAA.) correctly so that the + and - polarities
match the polarity diagrams inside the battery compartment.
•
About half a year of normal operation can be expected when using the general batteries.
•
When the batteries are exhausted, the commander should no longer operate the system. Replace both
batteries with new ones.
•
When the commander is not to be use for a long time, remove the batteries to avoid damage caused by
battery leakage and corrosion.
•
Avoid keeping the commander in extremely hot or humid locations.
•
Between remote control and remote sensor theree should be no obstacle and have to within 30
•
The remote controls's operating distance is about 0.2m to 6m away from the remote sensor.
ENJOY KARAOKE
You can enjoy KARAOKE by using karaoke disc.
1.
Set the "FUNCTION SWITCH" to "DVD/VCD/CD/MP3". position.
2.
Connect the microphone to 'MIC JACK".
3.
Press the "PLAY/PAUSE" button on the unit or the remote control to start playing.
4.
Press the "SET UP" button on the remote control and move to 'AUDIO SET UP" column by using the
"DIRECTION" button.
5.
By using the "DIRECTION" button to move to "KEY" column and select your favourite key.
6.
By using the "DIRECTION" button to move to "ECHO" column and select your favourite echo effect.
7.
By using the "DIRECTION" button to move to "MIC VOL" column and select your microphone sound level.
GAME
1.
Connect the joystick to the game port at the back of the unit.
2.
Load the game disc into the CD compartment.
3.
Select the "CD/VCD/MP3" function.
4.
A game menu will be displayed on the TV screen.
5.
Select your desired game by pressing the number button or F Skip / B Skip button.
6.
Press the "RETURN" button on the remote control to return back to TV game screen.
OPERATION ON DC JACK
Please use output DC12V 1000mA regulating external direct current power, the batteries can
automatically cut off the source, and check the positive and negative of the plug
AUX / MP3-IN
1.
Press the "STAND-BY/POWER" switch.
2.
Connect your MP3 player or any of your audio products to "AUX/MP3-IN" socket by using the
provided "AUX IN" cable.
3.
Switch on and play-back your connecting MP3 player or other audio products.
4.
The unit will play automatically.
5.
Adjust the volume control to get your favourite sound level.
6.
To stop playing, simply plug out the "AUX/MP3-IN" socket.
Attention:
To resume playing the VCD, CD, MP3, Cassette or Radio, make sure to plug out the "AUX IN" cable
from the "AUX/MP3-IN" socket.
RMS : 2.5 WATTS X 2
o
range.
.
Page 17
Publicidad
Tabla de contenido
