E ngli sh
13. Logbook for Scale
Non-automatic weighing instruments:
Verification interval (years)
Name and address of
customer (end user)
Scale model
Scale serial number
Lift serial number
Classification of the scale
Purpose of the logbook:
• The logbook retains all information relevant to the inspection, repair or modification of the instrument.
• The logbook can be provided by Joerns, the approved inspector or the approved repair engineer.
• The logbook must accompany the scale at the place of use.
• The logbook must always accompany the scale, even if the scale is mobile.
Responsibility of equipment holder (end user):
• The end user must make this logbook available at all times for the local regulatory authority, the
approved inspector, or approved engineer.
• The responsibility for producing the logbook lies with the end user of the logbook.
• The end user is responsible for looking after the integrity of the logbook.
• A missing or damaged logbook will result in signature refusal of the periodic verification and/or
refusal by the approved engineer to work on the scale.
• If the current logbook is replaced, the approved inspector or engineer must note this event in
the new logbook
• It is the end user responsibility that the approved bodies for verification fill in the logbook; the
end user should sign the logbook after the signature of the approved inspector or engineer.
*Initital verification (check box)
Date verified
(DD/MM/YY)
Verification body - EU versions only
Organisation ID #
Name/address of service provider
Represented by
Signature of service provider
Oxford
®
Elevate
27
294000.10065 Rev. B