Characteristics - ENAR QGH 25/45 Manual De Instrucciones

2

CHARACTERISTICS

The vibrating screeds are used for the vibrating and the finishing of the floors in the construction industry
and for the finishing of parts in the pre-cas industry. Two types are used: single and double beam screeds.
The double beam screed have two effects: first beam vibrates and second beam finishes the surface. The
depth-effect is from 15 to 25 cm with a double beam screed.
For very thick concrete layers, we recommend to use pokers at the same time in order to obtain the right
compaction and consistance of the concrete mass as well as its finishing.
The vibrations come from the vibration group consisting of an exciter powered by a petrol or electric engine.
In order to obtain a good finishing, please regulate accurately the heigth of the rail-guide on each side.
The pulling handle is mounted on silen blocks to reduce the transmission of vibrations to the operator.
MODEL
LENGHT
(m)
POWER SOURCE
SEPARATION
(mm)
FREQUENCY
(vibr./min)
VIBRATION
GROUP WEIGHT
(Kg)
STEEL BEAM
WEIGHT
(kg)
ALUMINIUM
BEAM WEIGHT
(kg)
MAX.
CENTRIFUGAL
FORCE
(kg)
FIXED AND EXTENSIBLE VIBRATING SCREEDS
EXTENDIBLE DOUBLE BEAM SCREEDS
QGH 25/45 QG 25/45
2,5 a 4,5 2,5 a 4,5
Petrol Petrol
HONDA (3,5HP) B&S (3,5HP)
270 270
7.000 7.000
55 55
50 50
30 30
300 300
QP 25/45 QP M 25/45
2,5 a 4,5 2,5 a 4,5
Electric 3ph. Electric 1ph.
1,5HP 1,5HP
270 270
6.000 6.000
56 58
50 50
30 30
280 280
FIXED DOUBLE BEAM SCREEDS
QG ó QGH QP
1,5 a 6 1,5 a 6
Petrol Electric 3ph..
1,5HP
HONDA
310 310
7.000 6.000
55 55
8 Kg/m 8 Kg/m
5,6 Kg/m 5,6 Kg/m
300 280
QPM
1,5 a 6
en
Electric 1ph.
1,5HP
310
6.000
58
8 Kg/m
5,6 Kg/m
280
3
3