Troubleshooting; Service Information - Black+Decker CS1024 Manual De Instrucciones

MAINTENANCE
Keep guards, air vents and the motor housing as clear as
possible of dust and dirt. Wipe with a clean cloth and blow
through with a low pressure air supply. Excessive build up
of metal dust can cause tracking of electrical current from
the internal parts to exposed metal parts.
Important! To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (other than those
listed in this manual) should be performed by authorized
service centers or other qualified service personnel,
always using identical replacement parts.
ACCESORIOS
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center.
Warning! The use of any accessory not recommended
for use with this tool could be hazardous. Use only 7-1/4 "
(184mm) blades with 5/8" diameter arbor.
Exception: 7" (175mm) abrasive blades can be used.
When cutting metal, be careful of hot sparks which are
thrown by the blade.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your
PROBLEM
Unit will not start

SERVICE INFORMATION

BLACK+DECKER offers a full network of company-owned and authorized service locations. All BLACK+DECKER
Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service.
For more information about our authorized service centers and if you need technical advice, repair, or genuine factory
replacement parts, contact the BLACK+DECKER location nearest you, or visit us at www.BlackandDecker-la.com
SPECIFICATIONS
Power
Disc diameter
Voltaje
AR, B2C
B3
B2
BR
No-load speed
Cable length

TROUBLESHOOTING

POSSIBLE CAUSE
Cord not plugged in
Circuit fuse is blown
Circuit breaker is tripped
Cord or switch is damaged
ENGLISH • 23
BLACK+DECKER product needs replacement, or
if it is of no further use to you, do not dispose of it
with household waste. Make this product available
for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
POSSIBLE SOLUTION
Plug tool into a working outlet
Replace circuit fuse. (If the product
repeatedly causes the circuit fuse to
blow, discontinue use immediately and
have it serviced at a BLACK+DECKER
service center or authorized servicer)
Reset circuit breaker. (If the product
repeatedly causes the circuit breaker to
trip, discontinue use immediately and
have it serviced at a BLACK+DECKER
service center or authorized servicer)
Have cord or switch replaced at
BLACK+DECKER Service Center
or Authorized Servicer.
CS1024
1500W
7-1/4" (184mm)
220V ~ 50Hz
120V ~ 50-60Hz
220V ~ 60Hz
127V ~ 60Hz
5500/min (rpm)
2m