Introduction; International Electrical Symbols - AEMC Instruments CA7024 Manual De Instrucciones

● This instrument meets the safety requirements of IEC61010-
1:1995.
● The Model CA7024 is designed for use on de-energized circuits
only.
● Connection to line voltages will damage the instrument and
could be hazardous to the operator.
● This instrument is protected against connection to telecom
network voltages according to EN61326-1.
● Safety is the responsibility of the operator.
1.1

International Electrical Symbols

This symbol signifies that the instrument is protected by double or
reinforced insulation.
This symbol on the instrument indicates a WARNING and that
the operator must refer to the user manual for instructions before
operating the instrument. In this manual, the symbol preceding
instructions indicates that if the instructions are not followed,
bodily injury, installation/sample and product damage may result.
Risk of electric shock. The voltage at the parts marked with this
symbol may be dangerous.
2
CHAPTER 1

INTRODUCTION

WARNING
Fault Mapper Model CA7024