Specifications - Sony XAV-A1 Manual De Instrucciones

Specifications

System
Laser
Semiconductor laser
Signal format system
NTSC
PAL
Monitor section
Display type Wide LCD color monitor
Size 7 in.
System TFT active matrix
Number of pixel
336,960 pixels
DVD/CD Player section
Signal-to-noise ratio
100 dB
Frequency response
10 – 20,000 Hz
Wow and flutter
Below measurable limit
Harmonic distortion (DVD)
0.01%
Tuner section
FM
Tuning range
87.5 - 108MHZ/87.5 - 107.9 MHz
Intermediate frequency
10.7 MHz/550 kHz
Usable sensitivity
9 dBf
Frequency response
30 - 15,000 Hz
Selectivity
75 dB (400 kHz)
S/N ratio
64 dB (stereo)
69 dB (mono)
Harmonic distortion at 1 kHz
0.5% (stereo)
0.4% (mono)
Separation 35 dB at 1 kHz
AM
Tuning range
531 - 1,602 kHz
530 - 1,710 kHz
Intermediate frequency
10.8 MHz / 450 kHz
Usable sensitivity
30 µV
54
Amplifier section
Outputs
Speaker outputs
(sure seal connectors)
Speaker impedance
4 - 8 ohms
Maximum power output
50 W × 4 (into 4 ohms, at 1 kHz)
General
Power requirements
12 V DC, from car battery (negative
ground)
Consumption current rating
Max. 10 A
Inputs
Power supply (1)
AUX (3)
Outputs Front PRE out (1)
Rear PRE out (1)
Subwoofer (mono) (2)
Power aerial relay control lead (1)
Power amplifier control lead (1)
Rear Monitor OUT (1)
Tone controls Bass ±10 dB at 100 Hz
Treble ±10 dB at 10 kHz
Dimensions With monitor closed
Approx. 178 × 50 × 185 mm (W × H
× D)
Mass Approx. 1.7 kg
Supplied accessories
Remote commander RM-X706 (1)
(incl. 1 lithium battery)
Parts for installation and
connections (1 set)
Operating Instructions (1 set)
Design and specifications are subject to
change without notice.
US and foreign patents licensed from Dolby
Laboratories.
• Lead-free solder is used for soldering
certain parts. (more than 80 %)
• Halogenated flame retardants are not used
in cabinets.
• VOC (Volatile Organic Compound)-free
vegetable oil based ink is used for printing
the carton.
• Packaging cushions do not use polystyrene
foam.