Battery Cover - Tasco OffShore Manual De Instrucciones

IV. Replacing the Compass Illuminator Batteries (OS 36/54)
Batteries are included and pre-installed in your Offshore binocular. When it becomes necessary to
replace them, unscrew the battery cover with a coin or screwdriver and replace the batteries with the
same type, a pair of alkaline #186 / LR43 , or silver oxide #389 / SR54 batteries. Be sure to install
the batteries in the same direction as the originals, with the fl at positive (+) side facing up towards
the cover on both batteries, and also check that the metal clip is over the positive (+) end of the top
battery as shown. Screw the battery cover back on tightly and press the compass illuminator switch
to test the light-a red glow should be visible around the compass (you may need to cover the right
objective lens if you are outside in bright light).
Tripod Adapter Socket

Battery Cover

Battery Cover
10
Positive (+)
Metal Clip Metal Clip
Facing Up Facing Up
Compass
Illuminator
Switch