Combi Machine With Seed Drill; Important - breviglieri mekfarmer 170 Instrucciones De Empleo Y Mantenimiento

M < 0,3T
................................................................. (prudential value)
Z > {[(M x s) – (0,2T x i)] / (d x i)}
where:
i = tractor's wheelbase
d = horizontal distance between the center of gravity of
the front ballast and the tractor's front axle
s = horizontal distance between the center of gravity
of the machine and the tractor's rear axle
T = weight of the tractor in running order
Z = ballast weight
M = weight of the machine
4.4 COMBI MACHINE WITH SEED DRILL (Fig. 8)
▪
Once the frame has been mounted on the machine, in order to raise the seed drill with the seeds, the overall weight of the
combination must not exceed the value given in the operation and maintenance manual.
▪
Make sure that the seed drill is correctly mounted, that it lifts in the right way and that nothing interferes with the hydraulic
pipes.
▪
Make sure that the mechanical parts of the seed drill do not interfere with the roller of the machine or with the machine
itself.
▪
Make sure that when you drive along the public roads, there are no sharp parts that project from the sides of the machine.
▪
Make sure that the relative signs are clearly visible behind the combi machine. If this is not the case, proceed as required by
the Highway Code regulations in force in the country where the machine is used.
When transporting on public highways, the seeder hopper must always be completely empty.
mekfarmer 170
.......... (for calculating the
Fig. 8

IMPORTANT

ballast)
T
0,2
Z
d
While working with power harrow in combination with
seed drill machine both the pins and tractors linkages
must be of 3rd. cat. in all different working widths. Be
very careful when coupling the machine with a seeder
and in the case of rear installation of hydraulic seeder
couplings. Each hydraulic seed drill coupling supplied with
the machine or at a later date on the Customer's request,
has a serial number and instruction manual where all the
specifications for assembly and use are given. In the event
however of the seeder coupling being fitted by the end
user, remember to:
- 27 -
T
i s
Fig. 5
CAUTION
macchine agricole
M